Jewellery Tools

Product Details:

Gold Tool Riveting Hexagonal Stake An Ideal for forming wire rivets, Features 15 holes in different diameters : with 5 slots, Conveniently sized and portable Dimension in Inch : 2"x2"x0.75" Approx Weight in : 0.270 Kg.

Product Details:

Gold Tool Black Pitch is used for holding the jewellery for diamond setting, engraving, polishing and fitting. It is used with pitch bowl either

Product Details:

Pneumatic Air Scribe Great For Metal smiths, Metal Working, Hobbyists & Jewelers This is a new pneumatic air scribe with an industrial diamond tip used for marking metal, glass, wood and plastic comes with an air hose, handpiece, 2 adaptors & 0-1/2" (139.7 mm) long, This is a new pneumatic air scribe with an industrial diamond tip, Used for marking glass, wood and plastic, Comes with an air hose, handpiece, 2 adaptors & o-rings, Hooks up to air coompressor (not included), The Handle Measures approximately 5 1/2" (139.7 mm) long.

Product Details:

Measuring Bangle Sizes has never been quicker or easier. With the  GOLD TOOL Bangle Gauge you  can measure both the inner circumference and inner diameter of your bangle. This  hollow, metal and plastic gauge is about the size of a small soda can. It features a series of 9 “steps” with markings for both the inner diameter and inner circumference. Those measurements are in both inches and millimeters! Inner diametermeasurements range from  2.2” (56mm) upto 2.8”(72mm).Inner circumference measurements range from 6.92”(175.9mm) upto 8.9” (226.2mm). The gauge isn’t too big either. It is just 4-1/4” tall and 3” wide Bracelet & Bangle Gauge Stand

Product Details:

TO HOLD RING FOR FINISHING 

Product Details:

Gold Tool Aluminium Measuring Ring Stick Universal

• This is a high quality ring stick precisely machined and calibrated to the finger gauge. 
• Light weight affordable and accurate measuring tool. 
• Ideal for Measuring ring or wedding band size
• A must for every jeweler. Marking a 1 To 36 Gauge.

Product Details:

TO HOLD TWEZZER

Product Details:

Gold Tool Bend Stamp This quality hardened steel stamp will mark your 999 item and is very easy to use. Just place the stamp at the tip of the tool on the object (inside ring or flat surface) and hit (easy but firmly) with a lightweight hammer.

Product Details:

• Gold Tool Bracelet Mandrel Pentagon
• This pentagon bracelet mandrel is perfect for shaping. stretching. and forming bracelets.
• HIgh quality manufactured and durable.
• Great for jewelers, silversmiths and goldsmiths.

Product Details:

FOR DRAWING WIRE FROM DIES , OR WIRE DRAW PLATE

Product Details:

Product Dimensions : 12.7 x 2.5 x 25.4 cm, Product Type : Beading & Jewellery Making, This Product is imported from USA - it is a 100% genuine product.

Product Details:

Re-size too-tight rings with professional results without trip to jewelry store, Easy to use - just place ring with snug fit on mandrel and turn top handle, Mandrel expands slightly to stretch ring without damage. For greater size increase unscrew handle and slide ring farther up mandrel and repeat process, Fits mens and womens rings from size 1 to 36. Mandrel has engraved size markings to aid accurate sizing. Heavy-duty brass and steel construction to last a lifetime. Both handles are removable for easy storage

Product Details:

Diamond Shovel is a Great for scooping up stones, beads and other small parts.

Product Details:

Gold Tool Round Iron Plate Available in Sizes : -> Round Iron Plate 4", Dimension In Inch : 4"x6 mm, Approx Weight in : 0.400 Kg, -> Round Iron Plate 5", Dimension In Inch : 5"x8 mm, Approx Weight in : 0.740 Kg, -> Round Iron Plate 6", Dimension In Inch : 6"x8 mm, Approx Weight in : 1.120 Kg. Round Iron Plate that is made available in numerous grades. With the assist of high quality iron and modern machines, our proficient professionals manufacture this round plate. Prior to final supply, our quality managers strictly examine this round plate on different parameters. Features : Corrosion free, Robustness, Durability.

Product Details:

Gold Tool Bracelet Mandrel Octagon For shaping, stretching, and forming bracelets and other large oval items. Made of hardened steel ground to a fine finish with a hollow center. Sizes is 15" x 3"

Product Details:

Gold Tool Rotating Revolving Bur & Tool Holder This rotating holder organizes up to 112 accessories. Stores 92 1/8" shank and 13 1/4" shank burs. Has 7 marked holes for drill bits 1/16" to 5/32". 3" deep x 2-3/4" diameter center cup holds small tools such as files and screwdrivers.

Product Details:

• Gold Tool Bracelet Mandrel Oval
• Ideal for making oval bangles, cuff, hoop earring, and large round necklace and bracelet links.
• Made of Smooth Steel Allows for Easy Forging.
• Tow Different Sizes :
• -> Bracelet Mandrel Oval 15" x 3"
• -> Bracelet Mandrel Oval 12" x 3"

Product Details:

Re-Size Too-Tight Rings with professional results without trip to jewelry store. Easy to use - just place ring with snug fit on mandrel and turn-top handle, Mandrel expands slightly to stretch ring without damage. For greater size increase unscrew handle and slide ring farther up mandrel and repeat process Fits men''s and women''s rings from size 2 to 14. Mandrel has engraved size marking to aid accurate sizing heavy duty brass and steel construction to last a lifetime.

Product Details:

iron mandrel bali road 1.5" x 12" Step Type, Approx Weight in 1. Kg.

Product Details:

TO HOLD TWEZZERS

Product Details:

• Gold Tool Hand Press 
• Available in Sizes : Base to Guide : 127
• Back to Centre : 82.5
• Hole Through Collar in Base : 35
• Diameter of Screw : 44.45
• Ram Hole X Depth : 19x38
• Operate With : Steel Rod Handle
• Machine Net Weight : 71 Kg
• Machine Dimension : 24x32.5x69 cm.
• Base to Guide : 152
• Back to Centre : 102
• Hole Through Collar in Base : 35
• Diameter of Screw : 44.45
• Ram Hole X Depth : 19x38
• Operate With : Steel Rod Handle
• Machine Net Weight : 97 Kg
• Machine Dimension : 27.5x35x70 cm
• Base to Guide : 165
• Back to Centre : 102
• Hole Through Collar in Base : 35
• Diameter of Screw : 50.8
• Ram Hole X Depth : 25x38
• Operate With : Cast Iron Wheel
• Machine Net Weight : 142.5 Kg
• Machine Dimension : 35x37.5x80 cm. 
• Hand Press Accessories : Hand Press Bush No. 0/Size 2"
• Hand Press Bush No. 1/Size 2.25" 
• Hand Press Bush No. 2/Size 2.50" 
• Hand Press Bush No. 3/Size 3"

Product Details:

Gold Tool Loupes 18 mm in Available in Different Sizes : -> Loupe 18 mm Chrome (10x) -> Loupe 18 mm Sharing (10x) -> Loupe 18 mm Rubber (10x) -> Loupe 18 mm Hex (10x) Feature : -> 0x magnification -> 0.7" (18mm) lens diameter -> Ideal for close inspection work, entomology, mycology, philately, instrument inspection etc., -> Glass lens with metal frame and chrome plated housing -> Folds away in it's own metal frame.

Product Details:

Gold Tool Heating Torch is used for melting and soldering the metal with the help butane gas.

Product Details:

Gold Tool Saw Frame

Deep bow piercing saw frame specially designed for deeper bow allowing use on applications that require large depth.

Used by jewellers, die-maker, dentist etc.

Product Details:

FOR WORKING ON ALL SMALL METERIAL IN HAND WORK

Product Details:

Features:

• We are manufacturer for gamut of German Adjustable Saw Frame.
• We were offering this German Adjustable Saw Frame industry
• leading price from other company. We are provided this saw frames
• as per the customer requirements and specification given by them.

 

Product Details:

Gold Tool 2 Sided Nylon Hammer is Replaceable Heads and Heavy Quality High Finished. 

Product Details:

A ball pein hammer, also known as a machinist''''s hammer, is a type of peening hammer used in metalworking. It is distinguished from a cross-hammer, diagonal-pein hammer, or chisel-pein hammer by having a hemispherical head. it is commonly used as a tool for metalworking.

Product Details:

Gold Tool Curved Burnisher Length - 1/4 in, Blade Length : 2-1/8 in, Curved, Metal Working Tip, Oval Shaped for smoothing metals or bezel setting

Product Details:

• Gold Tool 4 Cavity Wooden Block Plate Dapping blocks with round shapes are used with dapping punches to create a rounded domed shape on metals. Wood will not scratch or mar the surface of metals. Easy to use. All you need is the wood block, wood punches, rubber mallet or raw hide hammer.

Product Details:

• Gold Tool Casting and Gold Alloy
• Different Types : -> Alloy Casting 401 C (Loose)
• Material : Hard, Silver Percent : 10%.
• Alloy Gold 401 R (Loose), Material : Soft, Silver Percent : 10%.
• Alloy Selection is critical factor in the production of fine porosity free castings.
• A key element in our innovative process is our expert use of De-Ox Alloys.
• All of our alloys are mixed in house for the highest degree of quality control.

Product Details:

Versatile usage on any hard and brittle material. Widely used on alloy steel, tungsten carbide, glass, tool steel, semi precious stones, die mould saw blades, cutting tools, carbide insert and anywhere hard grinding and sharpening is required, Pack contains 5 different profiles, Flat, Round, Half Round, Triangle and Needle. Technical Specs :- Total length 5x180 mm.

Product Details:

• Gold Tool Hammer Brass With Hardwood Handle is Excellent balance. Small brass hammer. Hardwood handle. This Hammer is perfect for shaping riveting, bending and decorating thin metal & striking blows. Ideal for hobby, jewellery engineering, watchmaking etc...

Product Details:

Gold Tool Round Wire Gauge -> Measures standard 1-13 wire Gauge -> Numbers 1-36 are labeled -> Round -> Use for gauging non-ferrous metals and wires -> Gauges copper, plate, plate iron, steel, and more.

Product Details:

use as anvil for giving shapes to jewellery 

Product Details:

Helps you forge and shape metal or wax necklace